ASUS mm17de Manuel D’Utilisation
13
TROUBLESHOOTING (FAQ)
Problem & Question
Possible Solution
Power LED is not ON
l Press the Power Button to check if the
monitor is in the ON mode.
l Check if the Power Cord is properly
connected the monitor and the power
outlet.
outlet.
The Power LED lights
amber and there is no
screen image
amber and there is no
screen image
l Check if the monitor and the computer are
in the ON mode.
l Make sure the Signal Cable is properly
connected the monitor and the computer.
l Inspect the Signal Cable and make sure
none of the pins are bent.
l Connect the computer and another
available monitor to check if the computer
is properly working.
is properly working.
Screen image is too light or
dark
dark
l Adjust the Contrast and Brightness
settings via OSD.
Screen image is not
centered or sized properly
centered or sized properly
l Press the SPLENDID
™ Button for 2
seconds to automatically adjust the
image.
image.
l Adjust the H-Position or V-Position
settings via OSD
Screen image bounces or
a wave pattern is present
in the image
a wave pattern is present
in the image
l Make sure the Signal Cable is properly
connected the monitor and the computer.
l Move electrical devices that may cause
electrical interference.
Screen image has color
defects
(white does not look white)
defects
(white does not look white)
l Inspect the Signal Cable and make sure
that none of the pins are bent.
l Perform Reset via OSD.
l Adjust the R/G/B color settings or select
l Adjust the R/G/B color settings or select
the Color Temperature via OSD.
Screen image is blurry or
fuzzy
fuzzy
l Press the SPLENDID
™ Button for 2
seconds to automatically adjust the
image.
image.
l Adjust the Phase and Clock settings via
OSD.
No sound or sound is low
(MM17T only).
(MM17T only).
l Ensure that the Audio Cable is properly
connected the monitor and the computer
l Adjust the volume settings of both your
monitor and computer.
l Ensure the computer sound card driver is
properly installed and activated.