ASUS p3-p5g43 Manuel D’Utilisation

4-4

Chapte 4: BIOS setup

•  This function can support devices such as USB flash disks, or floppy disks 

with FAT 32/16 format and single partition only.

•  DO NOT shut down or reset the system while updating the BIOS to prevent  

system boot failure!

4.  When the correct BIOS file is found, EZ Flash 2 performs the BIOS update 

process and automatically reboots the system when done.

The ASUS EZ Flash 2 feature allows you to update the BIOS without having to go 

through the long process of booting from a floppy disk and using a DOS-based 

utility. The EZ Flash 2 utility is built-in the BIOS chip so it is accessible by pressing 

<Alt> + <F2> during the Power-On Self Tests (POST).
To update the BIOS using EZ Flash 2:
1.  Visit the ASUS website (www.asus.com) to download the latest BIOS file for 

the motherboard.

2.  Save the BIOS file to a floppy disk or a USB flash disk, then restart the 

system.

3.  You can launch the EZ Flash 2 in two ways.

(1)  Insert the floppy disk / USB flash disk that contains the BIOS file to the 

floppy disk drive or the USB port. 

 

Press <Alt> + <F2> during POST to display the following.

(2)  Enter BIOS setup program. Go to the Tools menu then select EZ Flash 

2 and press <Enter>.

 

You can switch between drives by pressing <Tab> before the correct file 

is found. Then press <Enter>.