ASUS p7h55-m plus Manuel D’Utilisation
8.
USB 2.0 ports 1 and 2. These two 4-pin Universal Serial Bus (USB) ports connect to
USB 2.0/1.1 devices.
9.
USB 2.0 ports 3, 4, 5, and 6. These four 4-pin Universal Serial Bus (USB) ports
connect to USB 2.0/1.1 devices.
10. DVI-D port (for P7H55-M LE and P7H55-M LX only). This port is for any DVI-D
compatible device. DVI-D can’t be converted to output RGB Signal to CRT and isn’t
compatible with DVI-I.
11. HDMI port
(for P7H55-M LE only). This is a High-Definition Mulltimedia Interface
(HDMI) connector, and is HDCP compliant allowing playback of HD DVD, Blu-Ray, and
other protected content.
12. PS/2 Keyboard port. This port is for a PS/2 keyboard.
1.7.2
Internal connectors
1.
USB connectors (10-1 pin USB78, USB910, USB1112)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with the USB 2.0 specification that supports up
to 480Mbps connection speed.
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
The USB 2.0 module is purchased separately.
P7H55-M LE
P7H55-M LE USB2.0 connectors
PIN 1
USB+5
V
USB_P10-
USB_P10+
GND
NC
USB+5
V
USB_P9
-
USB_P9
+
GND
USB910
PIN 1
USB+5
V
USB_P12-
USB_P12+
GND
NC
USB+5
V
USB_P11-
USB_P11+
GND
USB1112
PIN 1
USB+5
V
USB_P8
-
USB_P8
+
GND
NC
USB+5
V
USB_P7
-
USB_P7
+
GND
USB78
To configure an 8-channel audio output:
Use a chassis with HD audio module in the front panel to support an 8-channel audio
Use a chassis with HD audio module in the front panel to support an 8-channel audio
output.
1-10
ASUS P7H55-M LE Series