ASUS rs160-s5 Manuel D’Utilisation
ASUS RS160-S5/PX4
6-11
6.2.4
Managing Arrays
The LSI Corporation MPT Setup Utility allows you to perform other tasks related to
configuring and maintaining IM and IME volumes.
Refer to this section to view volume properties, manage the hot spare disk,
Refer to this section to view volume properties, manage the hot spare disk,
synchronize the array, activate the array, and delete the array.
Viewing volume properties
To view volume properties:
1. On the main menu, select RAID Properties.
Esc = Exit Menu F1/Shift+1 = Help
Enter = Select Item -/+/Enter = Change Item
LSI Corp Config Utility v6.18.01.00 (2007.08.08)
Adapter Properties -- SAS1064E
Adapter SAS1064E
PCI Slot 20
PCI Address(Bus/Dev/Func) 07:00:00
MPT Firmware Revision 1.22.01.00-IR
SAS Address 50000065:41236545
NVDATA Version 2B.00
Status Enabled
Boot Order 0
Boot Support (Enabled BIOS & OS)
RAID Properties
SAS Topology
Advanced Adapter Properties
2. The View Array screen appears. Here you can view properties of the RAID
array(s) created. If you have configured a hot spare, it will also be listed. If
you created more than one array, you may view the next array by pressing
<Alt+N>.
Esc = Exit Menu F1/Shift+1 = Help
Enter=Select Item Alt+N=Next Array C = Create an array R = Refresh Display
LSI Corp Config Utility v6.18.01.00 (2007.08.08)
View Array -- SAS1064E
Array 1 of 1
Identifier LSILOGICLogical Volume 3000
Type IM
Scan Order 0
Size(MB) 34332
Status Optimal
Manage Array
Slot Device Identifier RAID Hot Drive Pred Size
Num
Disk Spr Status Fail (MB)
0
SEAGATE ST373454SS 0003 Yes NO Primary Yes 34332
1
SEAGATE ST373454SS 0003 Yes NO Secondary No 34332