ASUS rs160-s5 Manuel D’Utilisation

2-29

ASUS RS160-S5/PX4

To uninstall the motherboard

1.  Disconnect all the pre-connected cables from the motherboard. See section

2.6 Cable connections for details.

2.  Uninstall all the devices from the motherboard including the CPU and 

heatsink, riser card bracket, and DDR DIMMs. Refer to the corresponding 

sections for instructions on removing these components.

3.  Use a Philips (cross) screwdriver to remove the screws that secure the 

motherboard to the base of the chassis.

 

Refer to the illustration below for the location of the motherboard screws.

4.  Carefully lift the motherboard out 

of the chassis as shown.

®