ASUS pentium 4 1u rackmount server ap160r-s Manuel D’Utilisation
16
Chapter 1: System Overview
1.4
Internal Features
The standard components inside the AP160R-S server include the
motherboard, backplane, bridge board, fans and fan modules, PCI riser card
assembly, and power supply. The pictures below show the standard
components of the server.
motherboard, backplane, bridge board, fans and fan modules, PCI riser card
assembly, and power supply. The pictures below show the standard
components of the server.
1. HDD bays
2. Backplane (underneath)
3. Bridge board
4. 1 x 40mm PCI fan
5. 8 x 40mm System fan
6. 1 x 40mm PSU fan
2. Backplane (underneath)
3. Bridge board
4. 1 x 40mm PCI fan
5. 8 x 40mm System fan
6. 1 x 40mm PSU fan
7. Copper CPU heatsink
8. NR-LSR motherboard
9. 4 x DIMM sockets
10. 1 x 40mm rear fan
11. 2 x PSU fan
12. 284W PSU
8. NR-LSR motherboard
9. 4 x DIMM sockets
10. 1 x 40mm rear fan
11. 2 x PSU fan
12. 284W PSU
1
2
4
3
6
12
9
10
11
11
1
7
5
8
The PCI riser card and card bracket assembly is not shown installed
in the above picture. Refer to section “2.7 Installing a PCI card”
for more details on the riser card.
in the above picture. Refer to section “2.7 Installing a PCI card”
for more details on the riser card.
NOTE