ASUS pe-p55t2p4d Manuel D’Utilisation

III. INSTALLATION

This sets the operation mode of the boot block area of the BIOS Flash ROM to
allow programming in the Enabled position for use with the "Flash Memory
Writer" BIOS programming utility as described on page 47.

Disabled

[1-2]  (Default)

Enabled

[2-3]

Boot Block Programming (Disable / Enable)

Disabled (Default)

Enabled

JP32

1 2 3

JP32

1 2 3

This clears the user-entered information stored in the Dallas Real Time Clock
such as hard disk information and passwords.  To clear the CMOS data:  (1)
Turn off the PC, (2) Short this jumper, (3) Power on the PC,
(4) Turn off the PC, (5) Remove this jumper, (6) Power on the PC, (7) Hold
down <Delete> during bootup and enter BIOS setup to re-enter user informa-
tion.

Normal Operation

[open]  (Default)

Clear CMOS Data

[short]  (momentarily)

CMOS RAM (Operation / Clear CMOS Data)

JP34

Operation (Default) Clear CMOS Data

JP34

(Memory)