ASUS pe-p55t2p4d Manuel D’Utilisation
40
P/E-P55T2P4D User’s Manual
IV
. BIOS
(Power Manage)
Video Off Option
This field determines when to activate the video off feature. The settings are Susp,
Stby-> Off (default), suspend -> off, always on, and all modes -> off.
This field determines when to activate the video off feature. The settings are Susp,
Stby-> Off (default), suspend -> off, always on, and all modes -> off.
Video Off Method
This field defines the video off features. The first option V/H SYNC + Blank, which
is the default setting, blanks the screen and turns off vertical and horizontal scan-
ning; DPMS (acronym for Display Power Management System) allows the BIOS to
control the video display card if it supports the DPMS feature; Blank Only only
blanks the screen. Use the latter for monitors that do not support the “Green” fea-
ture.
This field defines the video off features. The first option V/H SYNC + Blank, which
is the default setting, blanks the screen and turns off vertical and horizontal scan-
ning; DPMS (acronym for Display Power Management System) allows the BIOS to
control the video display card if it supports the DPMS feature; Blank Only only
blanks the screen. Use the latter for monitors that do not support the “Green” fea-
ture.
Take note that a screen saver software does not work with this feature. While the
monitor is shut off, this software cannot display.
monitor is shut off, this software cannot display.
Suspend Switch
This field enables or disables the SMI connector on the motherboard. This connec-
tor connects to the lead from the Suspend switch mounted on the system case. De-
fault setting for this field is Enabled.
This field enables or disables the SMI connector on the motherboard. This connec-
tor connects to the lead from the Suspend switch mounted on the system case. De-
fault setting for this field is Enabled.
Doze Speed, Stdby Speed
These two fields set the CPU speed during each mode. The number indicates what
the normal CPU speed is divided by.
These two fields set the CPU speed during each mode. The number indicates what
the normal CPU speed is divided by.
PM Timers
This section controls the time-out settings for the Power Management scheme. The
fields included in this section are “HDD Power Down”, which places the hard disk
into its lowest power consumption mode, and the Doze, Standby and Suspend sys-
tem inactivation modes.
This section controls the time-out settings for the Power Management scheme. The
fields included in this section are “HDD Power Down”, which places the hard disk
into its lowest power consumption mode, and the Doze, Standby and Suspend sys-
tem inactivation modes.
The system automatically “wakes up” from any power saving mode when there is
system activity such as when a key is pressed from the keyboard, or when there is
activity detected from the enabled IRQ channels.
system activity such as when a key is pressed from the keyboard, or when there is
activity detected from the enabled IRQ channels.
HDD Power Down shuts down any IDE hard disk drives in the system after a pe-
riod of inactivity. This time period is user-configurable to 1-15 Mins or Disable.
This feature does not affect SCSI hard drives.
riod of inactivity. This time period is user-configurable to 1-15 Mins or Disable.
This feature does not affect SCSI hard drives.
The Doze Mode, Standby Mode, and Suspend Mode fields set the period of time
after which each of these modes activate. At Max Saving, these modes activate
sequentially (in the given order) after one minute; at
Min Saving after one hour.
after which each of these modes activate. At Max Saving, these modes activate
sequentially (in the given order) after one minute; at
Min Saving after one hour.
IV. BIOS SOFTWARE