ASUS sl500 Manuel
A
PPLICATION
N
OTES
–
C
REATING AN
IKE IP
SEC
T
UNNEL
B
ETWEEN AN
I
NTERNET
S
ECURITY
R
OUTER AND A
W
INDOWS
2000/XP PC
Copyright 2003, ASUSTeK Computer, Inc.
Page
27
3.3 Configure the Internet Security Router
You need to login as admin to the Internet Security Router in order to configure the Internet Security Router. The
procedure involves VPN policy setup, firewall outbound and inbound ACL rules.
procedure involves VPN policy setup, firewall outbound and inbound ACL rules.
3.3.1 Configure VPN Policy
Click the
“VPN” menu and then click the “VPN Tunnel” submenu to access the VPN Tunnel configuration page.
Configure the VPN policy based on the settings listed in Table 3.1. When done with the configuration, click the
“Add” button to create the VPN policy. Please see Figure 3.1 for reference.
“Add” button to create the VPN policy. Please see Figure 3.1 for reference.
Table 3.1 VPN Policy Settings for the Internet Security Router
Field
Purpose
Value
Tunnel Name
Enter a unique name to identify the connection
SL1000_Policy
Site to Site radio button Make it a site-to-site VPN connection
Selected
Local Secure Group
Select address, subnet or IP range
Subnet
192.168.1.0/255.255.255.0
Remote Secure Group Select address, subnet or IP range
IP Address
192.168.19.166
Remote Gateway
Select Any, IP range or FQDN
IP Address
192.168.19.166
Preshared Key
A hexadecimal or ASCII shared secret
1234
IKE Mode
Select Main mode or Aggressive Mode
Main
Green dot
Changed from
“No” to “Yes”