ASUS sl500 Manuel
A
PPLICATION
N
OTES
–
C
REATING AN
IKE IP
SEC
T
UNNEL
B
ETWEEN AN
I
NTERNET
S
ECURITY
R
OUTER AND A
W
INDOWS
2000/XP PC
Copyright 2003, ASUSTeK Computer, Inc.
Page
3
2.2 Configure the IP Address of the Internet Security Router
You need to login as admin in order to configure the settings for the Internet Security Router.
2.2.1 Configure the WAN Port
Click on the
“WAN” menu and then click on the “WAN” submenu to access WAN Configuration page. Make sure
the settings for IP address, subnet mask and the gateway address are set exactly as shown in Figure 2.4. You
may ignore the settings for the primary and secondary DNS settings.
may ignore the settings for the primary and secondary DNS settings.
Figure 2.4. Configure WAN Port for the Internet Security Router
2.2.2 Configure the LAN Port
Click on the
“LAN” menu and then click on the “IP” submenu to access LAN Configuration page. Make sure the
settings for IP address, and subnet mask are set exactly as shown in Figure 2.5.
Figure 2.5. Configure LAN Port for the Internet Security Router
2.2.3 Verify the Routing Table in the Internet Security Router
Click on the
“Routing” menu to access Routing Configuration page. Make sure that a default route is exactly the
same as what is shown in Figure 2.6. Default route is indicated by
“0.0.0.0” for both the destination IP and the
destination netmask.