ASUS ta-55 Manuel D’Utilisation

1.  Push the bay lock upward.
2.  Insert the HDD into the bay.
3.  Align the HDD holes with the bay holes,
 then push down the bay lock to secure
 the HDD.

1.  Using a screwdriver, push the knock-down
 metal cover in and out of the chassis until
 it is removed.
2.  Insert the FDD into the bay.
3.  Secure the FDD with screws.
4.  Release the lock tabs on the front bezel
 to disengage the drive cover.

 

1.  Remove the metal cover opposite the
 slot that you want to use.
2.  Align the card connector with the slot,
 then press firmly until the card is
 completely seated on the slot.
3.  Push the expansion card lock on the rear
 panel to secure the slot.

1.  Hook the hinge-like tabs to the holes on
 the chassis. Swing the front bezel in the
 direction of the arrow and push to secure
 the front bezel to the chassis.
2.  Push the side cover towards the front
 bezel. 
3. Drive screws on the rear panel.