ASUS terminator p-iii Manuel D’Utilisation
ASUS Terminator Barebone System
19
2.5 Install a Hard Disk Drive
The chassis has one 3.5-inch hard disk drive (HDD) bay right under
the 5.25-inch bay. The following figures show the internal and external
views of the HDD bay location.
the 5.25-inch bay. The following figures show the internal and external
views of the HDD bay location.
Follow these steps to install an
IDE HDD.
IDE HDD.
1. Place the chassis upright.
5.25-inch Drive Bay
3.5-inch HDD Drive Bay
3. Carefully push the HDD into
the bay until its screw holes
align with the holes on the bay.
align with the holes on the bay.
Internal View
External View
HDD Component Side
HDD Screws
4. Secure the HDD with two
screws on each side of the
bay.
bay.
2. With its component side up,
carefully insert the HDD into
the 3.5-inch bay.
the 3.5-inch bay.