ASUS terminator p-iii Manuel D’Utilisation

2.7

Install a Modem Riser Card

The motherboard includes an AMR slot that supports a modem riser
card. The modem riser card is an optional item in the Terminator
barebone system. Refer to the instructions in this section if you
acquired a model without a modem riser card.

Follow these steps to install a
modem riser card.

1. Place the chassis on its side.
2. Remove the metal bracket

cover opposite the AMR
expansion slot.

3. Align the modem card golden

fingers to the AMR slot and its
metal bracket to the slot
opening on the chassis.

4. Press the card firmly until the

it is properly seated on the
slot.

5. Secure the card to the chassis

with a bracket screw.

The figure on the right shows a
modem riser card that you can
install on the AMR slot.