ASUS v-series p5945g Manuel D’Utilisation

8

Installation Manual

4.  For SATA HDD: Connect the 

SATA signal and power plugs to 

the connectors at the back of 

the drive.

 

For IDE HDD: Connect the IDE 

signal and power plugs to the 

connectors at the back of the drive.

If you installed an optical and/or floppy disk drive, remove the bay cover(s) 

on the front panel assembly before reinstalling it to the chassis. To do this:
1.  Locate the bay cover locks.

.  Press the locks outward to 

release the bay cover.

3.  Push the bay cover inward, then 

set it aside.

4.  Follow the same instructions to 

remove the 3.5” drive bay cover.

To reinstall the front panel assembly and side cover:
1.  Insert the front panel assembly hinge-like tabs to the holes on the 

right side of the chassis.

.  Swing the front panel assembly to the left, then insert the hooks to 

the chassis until the front panel assembly fits in place.

3.  Insert the side cover hooks to the chassis top and bottom holes.

4.  Push the side cover to the direction of the front panel until it fits in place.

5.  Secure the cover with two screws you removed earlier.

5

Air duct

5

4

3

1

1

1

Chassis tab holes

 

SATA 

IDE