ASUS VS248H Manuel D’Utilisation
2-2
Chapter 2: Setup
2.3
Detaching the arm/base (for VESA
wall mount)
The detachable arm/base of this monitor is specially designed for VESA wall
mount.
mount.
To detach the arm/base:
1.
Have the front of the monitor face down on a table.
2.
Remove the rubbers in the four screw holes. (Figure 1)
3.
Remove the base (Figure 2).
4.
Pry the rear hinge cover (Figure 3).
5.
Use a screwdriver to remove the four screws on the hinge (Figure 4), then
remove the hinge.
remove the hinge.
1
2
Figure 1
Figure 2
Figure 3
Figure 4
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
damage to the monitor.