ASUS VW202B Guide D’Installation Rapide

3

                                Quick start guide

To assemble the monitor base:

1. 

Have the front of the monitor face down on a table.

. 

Connect the base with the arm according to the below drawing. A click shows 
that the base has been connected successfully. 

We recommend that you cover the table surface with soft cloth to prevent 
damage to the monitor. 

1. 

Connect the cables as the following instructions:

• 

To connect the power cord: connect one end of the power cord securely to 

the monitor’s AC input port, the other end to a power outlet.

• 

To connect the USB cable (VW202B only): connect the B-type end of the 

USB cable to the monitor's USB port, and the A-type end to the computer's 
USB .0 port. 

• 

To connect the VGA cable / DVI cable: 

a.  Plug the VGA / DVI connector to the LCD monitor’s VGA / DVI port.

b.  Connect the other end of the VGA / DVI cable to your computer’s VGA / 

DVI port.

c.  Tighten the two screws to secure the VGA / DVI connector.

When both the VGA and the DVI cables are connected, you can choose either 
VGA mode or DVI mode from the Input Select item of the OSD functions.

• 

To connect the audio cable: connect one end of the audio cable to the  

monitor’s Audio-in port, the other end to the computer's audio-out port. 

(B-Type)

2.0