att e5945b Manuel D’Utilisation

0

Each cordless handset operates as an individual unit.  

The ringer sound, ringer volume, date/time, dial mode 
and language must be programmed separately for 

each cordless handset. Follow the steps below to 
program the cordless handset.  To stop at any time, 

press 

Choose cordless handset ringer sound
.  Press 

to begin programming.

2.  Press 

V

 or 

^

 

until the screen displays   

RINGER:

 and the current setting.

3.  Press 

 to change the current setting.

4.  Press 

V

 or 

^

 to display , 2, 3, 4 or OFF.  

There will be a sample of each ringer tone.

5.  Press 

 to choose the displayed ringer 

tone and exit.

If you choose OFF, the cordless handset ringer will be turned 

off, and the screen will display RINGER OFF when the cordless handset is 

idle (not in use). If there are any un-reviewed calls, the screen will display XX 

MISSED CALLS instead of RINGER OFF.

Set cordless handset display date and time
.  Press 

to begin programming.

2.  Press 

V

 or 

^

 until the screen displays 

DATE/TIME

.

3.  Press 

 to view or change date and 

time.

4.  Press 

V

 or 

^

 to change the month in the date 

and time line at the bottom of the display, then press 

.

5.  Repeat step 4 to set day, hour, minute, and AM/PM.
6.  Press 

 

to save selection and exit.

RINGER: 1

DATE/TIME

1/01  12:00 

am

You can choose to set the 

time manually, or you can allow it to be 

set automatically with incoming caller ID 

information. The time will be set automat-

ically only if you subscribe to the caller ID 

service provided by your local telephone 

company (see page 5). The date and 

time for the answering machine need to 

be set separately (see page 29).