att e5921 Manuel D’Utilisation
54
Appendix
FCC Part 68 and ACTA
This equipment complies with Part 68 of the FCC rules and with
technical requirements adopted by the Administrative Council for
Terminal Attachments (ACTA). The label on the back or bottom of
this equipment contains, among other things, a product identifier
in the format US: AAAEQ##TXXXX. This identifier must be provid-
ed to your local telephone company upon request.
The plug and jack used to connect this equipment to premises
wiring and the telephone network must comply with applicable
Part 68 rules and technical requirements adopted by ACTA. A
compliant telephone cord and modular plug is provided with this
product. It is designed to be connected to a compatible modular
jack that is also compliant. An RJ11 jack should normally be used
for connecting to a single line and an RJ14 jack for two lines. See
Ins��alla��ion ins����uc��ions in the user’s manual.
The Ringer Equivalence Number (REN) is used to determine how
many devices you may connect to your telephone line and still
have them ring when you are called. The REN for this product is
encoded as the 6th and 7th characters following the US: in the
product identifier (e.g., if ## is 03, the REN is 0.3). In most, but
not all areas, the sum of all RENs should be five (5.0) or less. For
more information, please contact your local telephone company.
This equipment may not be used with party lines. If you have spe-
cially wired alarm dialing equipment connected to your telephone
line, ensure the connection of this equipment does not disable
your alarm equipment. If you have questions about what will
disable alarm equipment, consult your telephone company or a
qualified installer.
If this equipment is malfunctioning, it must be unplugged from
the modular jack until the problem has been corrected. Repairs to
this telephone equipment can only be made by the manufacturer
or its authorized agents. For repair procedures, follow the instruc-
tions outlined under the limited warranty.
technical requirements adopted by the Administrative Council for
Terminal Attachments (ACTA). The label on the back or bottom of
this equipment contains, among other things, a product identifier
in the format US: AAAEQ##TXXXX. This identifier must be provid-
ed to your local telephone company upon request.
The plug and jack used to connect this equipment to premises
wiring and the telephone network must comply with applicable
Part 68 rules and technical requirements adopted by ACTA. A
compliant telephone cord and modular plug is provided with this
product. It is designed to be connected to a compatible modular
jack that is also compliant. An RJ11 jack should normally be used
for connecting to a single line and an RJ14 jack for two lines. See
Ins��alla��ion ins����uc��ions in the user’s manual.
The Ringer Equivalence Number (REN) is used to determine how
many devices you may connect to your telephone line and still
have them ring when you are called. The REN for this product is
encoded as the 6th and 7th characters following the US: in the
product identifier (e.g., if ## is 03, the REN is 0.3). In most, but
not all areas, the sum of all RENs should be five (5.0) or less. For
more information, please contact your local telephone company.
This equipment may not be used with party lines. If you have spe-
cially wired alarm dialing equipment connected to your telephone
line, ensure the connection of this equipment does not disable
your alarm equipment. If you have questions about what will
disable alarm equipment, consult your telephone company or a
qualified installer.
If this equipment is malfunctioning, it must be unplugged from
the modular jack until the problem has been corrected. Repairs to
this telephone equipment can only be made by the manufacturer
or its authorized agents. For repair procedures, follow the instruc-
tions outlined under the limited warranty.