Audiovox p-78 Manuel D’Utilisation

-8-

ct

When the Shuffle button is pressed, the tracks on the disc will be played
in a random, shuffled order (“SHF” will appear on the display panel).  The
Track Select button 

cp

 will also select tracks in the shuffled order instead

of the normal progression.  When all tracks on the disc have been played
in shuffled order, the next disc will be selected in normal order and its
tracks played in shuffled order.  The Track Shuffle mode will be canceled
by pressing the Shuffle button again (“SHF” will disappear from the
display panel) or by activating the Repeat 

cs

 or Scan 

cu

 functions.

When the Shuffle button is pressed and held longer than 2 seconds,
both the discs and the tracks will be played in a random, shuffled order
(“SHF” and  

  will appear on the display panel).  After all tracks on the

disc have been played, the changer will select a new disc in shuffled
order and play its tracks in shuffled order.  The Disc Shuffle mode will
be canceled by pressing the Shuffle button again (“SHF” and  

  will

disappear from the display panel) or by activating the Repeat 

cs

 or

Scan 

cu

 functions.

cu

When the Scan button is pressed, the first 10 seconds of each track on
the disc will be played in order (“SCAN” will appear on the display panel
and the track number will flash).  When a desired track is reached,
press the Scan button again and play of that track will continue (“SCAN”
will disappear from the display panel and the track number will stop
flashing).  The Track Scan mode will also be canceled by activating
the Disc Select 

cn

  &

 

co

, Track Select 

cp

, Repeat 

cs

, or Shuffle 

ct

functions.
When the Scan button is pressed and held longer than 2 seconds, the
first 10 seconds of the first track on each disc will be played (“SCAN”
and  

   will appear on the display panel and the disc number will flash).

When a desired disc is reached, press the Scan button again and play
of the disc will continue (“SCAN” and  

  will disappear from the

display panel and the disc number will stop flashing).  The Disc Scan
mode will also be canceled by activating the Disc Select 

cn

 & 

co

, Track

Select 

cp

, Repeat 

cs

, or Shuffle 

ct

 functions.

If a problem should develop while operating the CD changer, the
following error codes may appear on the display panel.

Indicates that there is no magazine loaded in the CD changer.

Indicates that there are no discs loaded in the CD
magazine in the changer.

E-01, etc.: Indicates an error in the laser reading the disc in slot #1

of the magazine (E-02 for disc in slot #2, etc.).  Eject the
magazine, remove the indicated disc and  make sure it is
clean, undamaged, and loaded correctly (label side up or
down as per CD changer owner’s manual).  Clean and
re-load the disc(s) as appropriate and check for proper
operation or try another disc.

Indicates a communication error between the radio and
CD changer.  Check the connections and cable of the
changer.

Indicates excessive temperature conditions at the CD
changer.  The error code will go off and play will resume
when the temperature at the changer returns to a
normal range.