Axis 20443r2 Manuel D’Utilisation

Specify a unique IP address for your camera, to establish communication with 

your network. Written as four numbers separated by periods, each number in the address 

must be in the range 0 - 255. For example: 192.168.0.125

IP addresses can be assigned at random within isolated networks, provided that 

each given address is unique. To avoid unnecessary clashes, it is strongly recom-

mended that you contact your network administrator prior to assigning an IP 

address for your product.   

Specify the default router (Gateway) used for connecting to other networks 

and network segments.

Specify the subnet mask for the subnet the AXIS 230 is located on. 

The host name entered here will be used in email sent by the AXIS 230, and in 

the unit’s log files. If the AXIS 230 uses a DNS name on the network, it can be a good idea 

to use the same name for the host name and the DNS name. 

Enter the name of the domain your AXIS 230 belongs to.

Enter the IP address of the primary DNS server. This server provides the 

translation of domain names to IP addresses on your network. 

This is used if the primary DNS server is unavailable.

Enter the HTTP port the AXIS 230 will use. The default setting is 80. Alterna-

tively, any port in the range 1024-65535 may be used, but check first with your system 

administrator before changing the default setting. See also the special considerations con-

cerning the firewall settings, on page 31.

This can be used to change the network speed for your camera. Normally, there is no need 

to use anything other than Auto-negotiate, which will automatically select the correct 

media type. However, if you are using a switch or similar device on your network and need 

to specify the media type, then this can be done by selecting the correct type from the 

drop-down list.