Allen-Bradley devicenet modules in logix5000 control systems Manuel D’Utilisation
Publication DNET-UM004A-EN-P - March 2004
15-12 Using POINT™ I/O Modules on a DeviceNet Network
Upload the Subnet Configuration and Save It to a File
Specify the Subnet File in the Configuration of the Adapter
After you configure the subnet, define it as the associated network for
the adapter. This lets the adapter pull the I/O data from the subnet
and use it to define the I/O parameters of the adapter on the main
DeviceNet network
the adapter. This lets the adapter pull the I/O data from the subnet
and use it to define the I/O parameters of the adapter on the main
DeviceNet network
To access the subnet from the main network, right-click on the
adapter and choose Associated Network.
adapter and choose Associated Network.
1. Right-click and upload the entire network.
2. Save the file and give it a name that identifies it as the ADN or ADNX subnet
configuration.
3. Close this instance of RSNetWorx
software.
1. In the original instance of RSNetWorx software, click the Device Bridging tab of
the ADN/ADNX adapter.
2. Click the Associate File button and select the file that you
just created for the subnet.
3. Close the dialog box.