Asrock 1core1333-2.66g Manuel D’Utilisation

1 3

2.3 CPU Installation

This motherboard is bundled with one

selected CPU operating at FSB1333

/ 2.66GHz. Please do not remove ASRock

CPU stickers on both sides of CPU socket on

this motherboard. If the stickers are

damaged, removed or bear the word

“VOID”, ASRock is not responsible for

the after service of this CPU.

In the future, you may adopt other

compatible Intel 775-LAND CPU on this

motherboard for upgrade purpose. For the

installation of Intel 775-LAND CPU, please

follow the steps below. ASRock reminds you

that as long as you adopt other CPU on this

motherboard, we will not be responsible for

the after service of the bundled CPU.

Before you insert the 775-LAND CPU into the socket, please check if

the CPU surface is unclean or if there is any bent pin on the socket.

Do not force to insert the CPU into the socket if above situation is

found. Otherwise, the CPU will be seriously damaged.

Step 1. Open the socket:

Step 1-1. Disengaging the lever by depressing

down and out on the hook to clear

retention tab.

Step 1-2. Rotate the load lever to fully open po-

sition at approximately 135 degrees.

Step 1-3. Rotate the load plate to fully open po-

sition at approximately 100 degrees.

Step 2. Insert the 775-LAND CPU:

Step 2-1. Hold the CPU by the edges where are

marked with black lines.

775-Pin Socket Overview

black line

ASRock CPU Sticker