3com WXR100 3CRWXR10095A Manuel D’Utilisation

The following is the Network Domain configuration for this scenario:

1 Make the WX switch with IP address 10.10.10.1 a seed of a Network 

Domain called globaldom and establish a peer relationship with the WX 
switch with IP address 20.20.20.1. Type the following commands:

WX1200# set network-domain mode seed domain-name globaldom
success: change accepted.
WX1200# set network-domain peer 20.20.20.1
success: change accepted.

2 Make the WX switch with IP address 20.20.20.1 a seed of a Network 

Domain called globaldom and establish a peer relationship with the WX 
switch with IP address 10.10.10.1. Type the following commands:

WX1200# set network-domain mode seed domain-name globaldom
success: change accepted.
WX1200# set network-domain peer 10.10.10.1
success: change accepted.

3 Make the three WX switches in Mobility Domain A members of the 

Network Domain, specifying WX switch 10.10.10.1 as the their Network 
Domain seed. Type the following command on all three WX switches:

WX1200# set mobility-domain mode member seed-ip 10.10.10.1
success: change accepted.

4 Make the WX switches in Mobility Domains B and C members the 

Network Domain, specifying WX switch 20.20.20.1 as the their Network 
Domain seed. Type the following command on all of the WX switches in 
both Mobility Domains:

WX1200# set mobility-domain mode member seed-ip 20.20.20.1
success: change accepted.

5 Display the Network Domain status. Type the following command on the 

WX switch with IP address 10.10.10.1:

WX1200# display network-domain
Network Domain name: globaldom
Peer                State
---------------     -------------
20.20.20.1          UP

Member              State             Mode 
---------------     -------------     ------     
---------------
10.10.10.1          UP                  SEED 
10.10.10.2          UP                MEMBER 
10.10.10.3          UP                MEMBER