3com WX1200 3CRWX120695A Manuel D’Utilisation

C

HAPTER

 6: C

ONFIGURING

 

AND

 M

ANAGING

 IP I

NTERFACES

 

AND

 S

ERVICES

To clear all SSH server sessions, type the following command:

WX1200# clear sessions admin ssh
This will terminate manager sessions, 
do you wish to continue? (y|n) [n]y
Cleared ssh session on tty3

(To manage Telnet client sessions, see “Logging In to a Remote Device” 
on page 132.)

Telnet requires a valid username and password for access to the switch. 

After the username prompt is displayed, MSS allows 30 seconds to enter 
a valid username and password to complete the login. If you do not press 
Enter or complete the login before the timer expires, MSS ends the 
session. This timer is not configurable. 

Telnet is disabled by default. To enable Telnet, use the following 
command:

set ip telnet server {enable | disable}

To log in with Telnet, a user must supply a valid username and password. 
To add a username and password to the local database, use the following 
command:

set user username password password

Optionally, you also can configure MSS either to locally authenticate the 
user or to use a RADIUS server to authenticate the user. Use the following 
command:

set authentication admin {user-glob} 
method1 [method2] [method3] [method4]

You can use the same username and password for SSH or create a new 
one. For a CLI example, see “Adding an SSH User” on page 114.