3com WX1200 3CRWX120695A Manuel D’Utilisation

To view the status of the Mobility Domain for the WX switch, use the 
display mobility-domain command. For example:

WX# display mobility-domain

Mobility Domain name: pleasanton
Member 

State 

Type (*:active) Model 

Version

--------------- ------------- --------------- -------- ----------
10.8.121.101 STATE_DOWN SEED 

WX-2200 

6.0.0.0

10.8.121.102 STATE_UP 

SECONDARY-SEED* 

WX-2200 

6.0.0.0

10.8.121.103 STATE_UP 

MEMBER 

WX-2200 

6.0.0.0

10.8.121.104 STATE_UP 

MEMBER 

WX-2200 

6.0.0.0

To view the configuration of the Mobility Domain, use the display 
mobility-domain config command on either the seed or a nonseed member. 

„

To view Mobility Domain configuration on the seed:

WX1200# display mobility-domain config
This WX is the seed for domain Pleasanton.
192.168.12.7 is a member
192.168.15.5 is a member

„

To view Mobility Domain configuration on a member:

WX1200# display mobility-domain config
This WX is a member, with seed 192.168.14.6

You can clear all Mobility Domain configuration from a WX switch, regardless 
of whether the WX switch is a seed or a member of a Mobility Domain.s.

You might want to clear the Mobility Domain to change a WX switch from one 
Mobility Domain to another, or to remove a WX switch from the Mobility 
Domain. To clear the Mobility Domain, type the following command:

WX1200# clear mobility-domain
success: change accepted 

This command has no effect if the WX switch is not configured as part of 
a Mobility Domain.

You can remove individual members from the Mobility Domain on the 
seed WX switch. To remove a specific member of the Mobility Domain, 
type the following command:

clear mobility-domain member ip-addr

This command has no effect if the WX switch member is not configured 
as part of a Mobility Domain or the current WX switch is not the seed.