3com WX1200 3CRWX120695A Manuel D’Utilisation

C

HAPTER

 8: C

ONFIGURING

 

AND

 M

ANAGING

 M

OBILITY

 D

OMAIN

 R

OAMING

The command display roaming vlan displays all VLANs in the Mobility 
Domain, the WX switches servicing the VLANs, and their tunnel affinity 
values configured on each switch for the VLANs.

The member WX switch that offers the requested VLAN reports the 
affinity number. If multiple WX switches have native attachments to the 
VLAN, the affinity values they advertise are a way to attract tunneled 
traffic to a particular WX switch for that VLAN. A higher value represents 
preferred connection to the VLAN. (For more information, see “Changing 
Tunneling Affinity” on page 93.)

To display roaming VLANs, type the following command:

WX1200# display roaming vlan
VLAN

WX Affinity

---------------- --------------- --------
vlan-eng

192.168.12.7

  5

vlan-fin

192.168.15.5

  5

vlan-pm

 192.168.15.5

  5

vlan-wep

192.168.12.7

  5

vlan-wep

192.168.15.5

  5

(For more information about this command and the fields in the output, 
see the 

.)

The command display tunnel displays the tunnels that the WX switch is 
hosting to distribute to a locally attached VLAN. To display tunnel 
information, type the following command:

WX1200# display tunnel
VLAN

 Local Address

Remote Address  State

Port  LVID  RVID

---------------- --------------- --------------- ------- ----- ----  ---
vlan-eng

192.168.12.7

 192.168.15.5

 UP

 1024

130  4103

vlan-eng

192.168.12.7

 192.168.14.6

 DORMANT  1026

130  4097

vlan-pm

 192.168.12.7

 192.168.15.5

 UP

 1024  4096

160

(For more information about this command and the fields in the output, 
see the 

.)