3com WX1200 3CRWX120695A Manuel D’Utilisation

To enable broadcast control features on a service-profile basis, using the 
following commands:

set service-profile name proxy-arp {enable | disable}
set service-profile name dhcp-restrict {enable | disable}
set service-profile name no-broadcast {enable | disable}

For example, to enable all these broadcast control features in service 
profile sp1, use the following commands:

WX1200# set service-profile sp1 proxy-arp enable
success: change accepted.
WX1200# set service-profile sp1 dhcp-restrict enable
success: change accepted.
WX1200# set service-profile sp1 no-broadcast enable
success: change accepted.

You can display the following types of information for QoS:

„

Radio profile QoS settings: QoS mode

„

Service profile QoS settings: CAC, static CoS, and broadcast control 
settings

„

Broadcast control settings

„

Default CoS mappings

„

Individual DSCP-to-CoS or CoS-to-DSCP mappings

„

The DSCP table (a reference of standard mappings from DSCP to IP 
ToS and IP precedence)

„

QoS Statistics for the MAP forwarding queues

To display the QoS mode and all other settings for a radio profile, use the 
following command:

display radio-profile {name | ?}

The following example shows the configuration of radio profile rp1.

WX1200# display radio-profile rp1
Beacon Interval:                   100   DTIM Interval:                       1
Max Tx Lifetime:                  2000   Max Rx Lifetime:                  2000
RTS Threshold:                    2346   Frag Threshold:                   2346
Long Preamble:                      no   Tune Channel:                      yes
Tune Power:                         no   Tune Channel Interval:            3600