3com WX1200 3CRWX120695A Manuel D’Utilisation

To add or remove a static multicast router port, use the following 
command:

set igmp mrouter port port-list {enable | disable}

To add a static multicast receiver port, use the following command:

set igmp receiver port port-list {enable | disable}

You can use the CLI to display the following IGMP snooping information:

„

Multicast configuration information and statistics

„

Multicast queriers

„

Multicast routers

„

Multicast receivers

To display multicast configuration information and statistics, use the 
following command:

display igmp [vlan vlan-id]

The display igmp command displays the IGMP snooping state, the 
settings of all multicast parameters you can configure, and multicast 
statistics.

To display multicast information for VLAN orange, type the following 
command:

WX1200# display igmp vlan orange
VLAN: orange
IGMP is enabled
Proxy reporting is on
Mrouter solicitation is on
Querier functionality is off
Configuration values: qi: 125 oqi: 300 qri: 100 lmqi: 10 rvalue: 2 Multicast
router information:
Port Mrouter-IPaddr Mrouter-MAC

Type

TTL

---- --------------- ----------------- ----- -----

1

192.28.7.5 00:01:02:03:04:05 dvmrp

17

Group

Port Receiver-IP

Receiver-MAC

TTL

--------------- ---- --------------- ----------------- -----

224.0.0.2 none none

none

undef

237.255.255.255

5

10.10.10.11 00:02:04:06:08:0b

258