3com WX1200 3CRWX120695A Manuel D’Utilisation
634
C
HAPTER
A: T
ROUBLESHOOTING
A
WX S
WITCH
/number-of-messages — Displays the specified number of the most
recent entries in the log, starting with the least recent.
recent entries in the log, starting with the least recent.
To filter trace output by MSS area, use the facility facility-name keyword.
For a list of valid facilities for which you can view event messages, type
the following command:
For a list of valid facilities for which you can view event messages, type
the following command:
WX1200# display log trace facility ?
<facility name>
<facility name>
Select one of: KERNEL, AAA,
SYSLOGD, ACL, APM, ARP,ASO, BOOT, CLI,
CLUSTER, CRYPTO, DOT1X, ENCAP,
ETHERNET, GATEWAY, HTTPD, IGMP, IP,
MISC, NOSE, NP, RAND, RESOLV, RIB, ROAM,
ROGUE, SM, SNMPD, SPAN, STORE, SYS,
TAGMGR, TBRIDGE, TCPSSL, TELNET, TFTP,
TLS, TUNNEL, VLAN, X509, XML, MAP, RAPDA,
WEBVIEW, EAP, PORTCONFIG, FP.
CLUSTER, CRYPTO, DOT1X, ENCAP,
ETHERNET, GATEWAY, HTTPD, IGMP, IP,
MISC, NOSE, NP, RAND, RESOLV, RIB, ROAM,
ROGUE, SM, SNMPD, SPAN, STORE, SYS,
TAGMGR, TBRIDGE, TCPSSL, TELNET, TFTP,
TLS, TUNNEL, VLAN, X509, XML, MAP, RAPDA,
WEBVIEW, EAP, PORTCONFIG, FP.
Copying Trace Results
to a Server
To copy the contents of the trace buffer to a file on a TFTP server, use the
following command:
following command:
copy trace-buffer-name tftp://[destination-ip-addr |
destination-hostname]/destination-filename
destination-hostname]/destination-filename
To find the name of the trace buffer file, use the dir command.
For example, the following command copies the log messages in trace
buffer 0000000001 to a TFTP server at IP address 192.168.253.11, in a
file called log-file:
buffer 0000000001 to a TFTP server at IP address 192.168.253.11, in a
file called log-file:
WX1200# copy 0000000001 tftp://192.168.253.11/log-file
Clearing the Trace
Log
To clear all messages from the trace log buffer, type the following
command:
command:
WX1200# clear log trace
List of Trace Areas
To see all MSS areas you can trace, type the following command:
WX1200# set trace ?