3com WX1200 3CRWX120695A Manuel D’Utilisation

C

HAPTER

 5: C

ONFIGURING

 

AND

 M

ANAGING

 P

ORTS

 

AND

 VLAN

S

You must assign a name to a VLAN before you can add ports to the 
VLAN. You can configure the name and add ports with a single set vlan 
command or separate set vlan commands.

Once you assign a VLAN number to a VLAN, you cannot change the 
number. However, you can change a VLAN’s name.

For example, to assign the name red to VLAN 2, type the following 
command:

WX1200# set vlan 2 name red

After you create a VLAN, you can use the VLAN number or the VLAN 
name in commands. In addition, the VLAN name appears in CLI and 
3Com Wireless Switch Manager displays.

To add a port to a VLAN, use the following command:

set vlan vlan-id port port-list [tag tag-value]

You can specify a tag value from 1 through 4093. 

For example, to add ports 3 through 6 and port 8 to VLAN red, type the 
following command:

WX1200# set vlan red port 3-6,8
success: change accepted.

Optionally, you also can specify a tag value to be used on trunked 802.1Q 
ports. 

To assign the name marigold to VLAN 4, add ports 1 through 4 and port 
6, and assign tag value 11 to port 6, type the following commands:

WX1200# set vlan 4 name marigold port 1-4
success: change accepted.
WX1200# set vlan 4 name marigold port 6 tag 11
success: change accepted.