3com WX4400 3CRWX440095A Manuel D’Utilisation

C

HAPTER

 6: U

SING

 RF P

LANNING

3 Select Create RF Obstacles from the menu that is displayed. The Create 

RF Obstacle dialog box appears.

4 Define the RF obstacle.

5 Click Finish.

The layer’s objects are now obstacles in your floor plan. 

You can import RF measurement data by means of a site survey done 
outside of 3WXM. Using the Site Survey Order report from 3WXM, a map 
is created of your site that can be used in an Ekahau site survey. After the 
survey is complete, the measurement data can be imported back into 
3WXM, and RF obstacles adjusted. In this way, actual, measured 
information about RF obstacles can be obtained and incorporated into 
your plan.

This guide contains post-deployment information about optimization on 
“Displaying the RF Coverage Area” on page 187. For pre-deployment 
information about optimization, see “Optimizing a Network Plan” in the