AirLive ov-1000 series Fiche De Données

5F, No.96, Min-ChuanRd, Hsin-tien City, Taipei, Taiwan

- IEEE802.3 10BASE-T
- IEEE802.3u 100BASE-TX/100BASE-FX
- IEEE 802.3ab 1000BaseTX, IEEE 802.3z
- IEEE 802.3z 1000BaseSX/LX standards
- IEEE 802.3x Flow Control and Back pressure

- Fiber: Duplex SC
- RJ-45 Socket: CAT.5e (10/100/1000Mbps) Twisted 

Pair cable

  - Auto MDI/MDI-X
  - Auto-Negotiation Function

- Fiber Core: Multi-Mode (62.5/125um, 50/125um), 

Single Mode (9/125μm)

- Wavelength:
  - 850nm(Multi-mode)
  - 1310nm(Single mode)
- Fiber Distance:

  - 550M (Multi-Mode Fiber)
  - 20 KM (Single-Mode Fiber)

- 16Kbyte (Pure converter mode)
- 2Kbyte (Switch converter mode)

- UTP→Fiber: If UTP port link down, then converter 

will forced fiber to link down.

- Fiber→UTP: If Fiber port link down, the media 

converter will force UTP port to link down.

- DIP Switch 1: UTP→Fiber LLF Enable/Disable
- DIP Switch 2: Fiber→UTP LLF Enable/Disable

- Power
- UTP (Speed, Link/Act, FDX/COL)
- Fiber (Link/Act, FDX/COL)

he OV-1000 Series is a cost- effective 
solution for the converting 10/100/1000 

Base-TX to 1000Base-FX cabling. It will allow 
you to extend the cabling distance of your 
10/100/1000Base-T network up to 550m for multi-
mode fiber or 20 kilometers for single-mode fiber. 
The OV-1000 Series gives you the option to 
choose from SC multi- mode fiber connector and 
SC single-mode fiber connector. The OV-1000 
Series provides you with one Fiber connector for 
your fiber optic cable and one Ethernet RJ-45 
port (Auto MDI/MDIX) for your 10/100/1000Base-
TX copper cable connection. There are 2 DIP 
switches to set the operation mode for UTP, Fiber 
ports and link loss forwarding function.