AEG lavatherm 37320 Manuel D’Utilisation
Venting
32
Venting through a Vent Hose
The vent hose expelling the hot air should have a 100 mm diameter and
be no longer than 4 meters. Avoid bends in the vent hose as this will
reduce the air flow. The maximum length of the vent hose may be:
4 meters with 0 bends, or
2 meters with 2 bends.
If the vent hose is to be permanently installed to the outside, a wall box
or suitable cover should be used on the outside wall.
be no longer than 4 meters. Avoid bends in the vent hose as this will
reduce the air flow. The maximum length of the vent hose may be:
4 meters with 0 bends, or
2 meters with 2 bends.
If the vent hose is to be permanently installed to the outside, a wall box
or suitable cover should be used on the outside wall.
Example:
A vent hose (Part number: 899647000010/1) and wall box (Part
number: 899647000020/0) are available from your local AEG Service
Force Centre.
number: 899647000020/0) are available from your local AEG Service
Force Centre.
Ensure the vent hose is not squashed. The drying efficiency of the
tumble dryer will be affected and may cause the safety cut outs to
operate.
tumble dryer will be affected and may cause the safety cut outs to
operate.
1
Warning! The vent hose must not be connected to a flue pipe or
chimney designed to carry the exhaust from a fuel burning heating
appliance.
chimney designed to carry the exhaust from a fuel burning heating
appliance.