Alinco dj-175 e Manuel D’Utilisation

4.Basic Operation

1. Press the FUNC key in the VFO mode, and while 

is displayed, press the 

key to display the current tuning step.

2. Rotate the dial to select the desired tuning step.

3. Press any key except for the MONI key to complete setting.

In conventional repeater systems, a signal received on one frequency is retransmitted

on another frequency.  The difference between these two frequencies is called the

offset frequency.  The selectable offset frequency of this unit is from 0 to 99.995MHz.

1. Press the FUNC key, and while 

is displayed, press the 

key to display the

current offset frequency and shift direction settings.

• Tuning step can't be changed in the Memory mode.
• When the tuning step is changed from 5kHz,10kHz,15kHz,20kHz or 30kHz to

12.5kHz and 25kHz or vice versa, the operating frequency and the shift width
automatically suit to the new setting.

DOWN

STP-5

STP-10

STP-12.5

STP-15

STP-20

STP-25

STP-30

(unit: kHz)

UP

Tuning step

5.0kHz
10.0kHz
12.5kHz

15.0kHz
20kHz
25kHz

30kHz

Entry completion digit

1kHz
10kHz 
10kHz

1kHz
10kHz
10kHz

10kHz

Final digit selection

Accept 0 or 5 as valid number.
Accept any of 0 to 9 keys.
When you input the 10kHz digit, the 1kHz digit is 
set automatically as follows.
0---00.0, 1---12.5, 2---25.0, 3---37.5, 4---invalid,
5---50.0, 6---62.5, 7---75.0, 8---87.5, 9---invalid
Accept 0 or 5 as valid number.
Auto-complete after the 10kHz digit entry.
When you input the 10kHz digit, the 1kHz digit is 
set automatically as follows.
0---00.0, 2---25.0, 5---50.0, 7---75.0
Other entries are invalid.
Auto-complete after the 10kHz digit entry.