Alinco dj-175 e Manuel D’Utilisation

5.Useful Functions

You can select the memory channels that you wish to skip during the memory-scan.

• Press the FUNC key in the Memory mode, and while 

is displayed, press the 

key to set the currently selected memory channel as a skip channel.

Use the same procedure to clear the skip channel setting.

• The 10MHz decimal point appears for memory channels that are set as skip

channels.

Press the FUNC key, and while 

is displayed, press the 

key to set the Keylock

function on, and repeat the same to quit.

When the Keylock is on, the 

is displayed on the LCD.

When the Keylock is on, other than the following, all operations are blocked.

* PTT

* LAMP

* MONI

* VOL

* SQL

* Tone-burst

* POWER ON/OFF

* DTMF tone

This function is to generate an audible tone to access European repeaters mostly used

in Europe.

• To output the tone-burst tone, press the MONI key while holding down the PTT key.

The tone is transmitted as long as the MONI key is pressed.

The initial setting for the tone-burst tone is 1750Hz, but this can be changed in the

Set mode (page 42).

• While transmitting the tone-burst tone, the CTCSS/DCS tone is temporary

suspended.

5.3

Keylock function can't be activated on the Repeater-Access function memory
channel.

5.2

The Call channel and Repeater-Access memory are automatically skipped
during scanning.