ADC MM701F Manuel D’Utilisation
Chapter 4: Managing the Modem Using the Console Port & Telnet
MM701F User Manual
51
5
Type
9
to enter the DNS address that is provided to the requesting DHCP client—only if
you are operating in server mode. This IP Address is also available from your LAN
administrator.
administrator.
6
Type
10
to select
Apply
.
Apply
immediately activates the changes that you have made for this
session.
7
From the
Main Menu,
select
Save New System Configuration
to save these settings or the
changes will be lost upon reboot or power cycle.
8
If you have enabled DHCP, select
Reboot
from
Main Menu
to reboot the router.
Setting Up NAT
This procedure is optional. Follow this procedure to enable or disable NAT for a WAN session.
From the
Main Menu
, select
WAN Setup
to access the
WAN Sessions
page.
1
Select the session for which you wish to enable NAT. The
WAN Sessions Options
screen
displays.
2
From the
WAN Sessions Options
screen, select the NAT option and type
1
or
2
to either
disable
or
enable
(respectively) NAT.
3
From the
Main Menu
, type
10
to select
Apply
.
Apply
immediately activates the changes that
you have made for this session.
4
From the
Main Menu,
type
5
to select
Save New System Configuration
and save these settings.
Otherwise, the changes will be lost upon reboot or power cycle.
.
Session State
1. Disable
2. Enable
2. Enable
Select session NAT (Return to exit) ->
•
If DHCP Client is selected, you do not need to configure an IP address.
•
In Bridge mode, you need an IP address for the LAN port to use a Browser
or Telnet to manage the MM701F.
or Telnet to manage the MM701F.