ADC megabit modem 700f Manuel D’Utilisation
Chapter 6: Configuring PPP Sessions
Megabit Modem 400F, 500L, 600F, and 700F User Manual
59
2
Enter the
IP address
and the
Net Mask
.
3
Click on the box adjacent to the letters DHCP. A check mark in the box indicates the
modem's DHCP server is enabled. No check mark in the box indicates the modem's DHCP
server is not enabled.
modem's DHCP server is enabled. No check mark in the box indicates the modem's DHCP
server is not enabled.
4
Click
Apply
.
Saving the Configuration
Although you have submitted your new system settings, the parameters are not permanent
until you write them to NVRAM. See
until you write them to NVRAM. See
“Saving the Configuration” on page 28
when you want
to save to NVRAM.