ADC CRA-C Manuel D’Utilisation
Install the Megabit Modem CRA-C
Megabit Modem CRA-C User Manual
15
Connect to the data network using either the black straight-through cable or the
yellow cross-over cable:
yellow cross-over cable:
1
Plug the RJ-45 connector of the Category 3 cable into the
10BASE-T MDI-X connector on the Megabit Modem CRA-C
rear panel (Figure 6).
10BASE-T MDI-X connector on the Megabit Modem CRA-C
rear panel (Figure 6).
2
Attach the other end of the Category 3 cable to the 10BASE-T
port of your data network.
port of your data network.
Figure 6. Connecting to the Data Network