ADC CRA-C Manuel D’Utilisation

Do the following for each system setting option you want
to change:

•

Type the number of the option you want to configure.

•

Type the appropriate information for each option as indicated
in Table 7 then press 

ENTER

ENTER

.

1

Change
System Time

Type the new time in the 24-hour clock format
hh:mm:ss at the prompt.  The new time shows in the
upper right corner of the screen.

2

Change
System Date

Type the month, day, and year in the mm/dd/yy format
at the prompt.  The new date shows in the upper left
corner of the screen.

3

Change
Password

Enter a maximum of eight characters.  To enter a new
password, do the following:

• Type 

3

3

 and the message

 Creating user

password, press ENTER

 displays.  Press

ENTER

ENTER

.

• When prompted 

Please enter the new

password,

 type the new password then press

ENTER

ENTER

.  An 

*

 appears on the screen as you type

each character of the password.

• When prompted 

Please retype the

password,

 type the new password again then

press 

ENTER

ENTER

.  You get this confirmation:

Password accepted.

If you change the default password, write it down and
save it in a secure place.  You cannot recover the
password if it is forgotten.

4

Factory
Default

Configuration

Resets all ADSL transceiver and Ethernet bridge values

to default.  After you type 

4

4

, a message warns you

that you will reset these values.  Select either N (no) or
Y (yes) to reset.  When you select Y, the modem
restarts.  Press the spacebar several times to autobaud.
You must then log in again.  All ADSL transceiver and
Ethernet bridge values are now at default values,
including the password.