Autotek autocad raster design 2010 Manuel D’Utilisation
Scanning software might mirror drawings, or you might occasionally scan the
back of the drawing by mistake. You can correct these problems by mirroring
the image.
back of the drawing by mistake. You can correct these problems by mirroring
the image.
IMPORTANT The axes for mirror operations are always relative to the image. If
the image has been rotated or repositioned in the drawing, the mirror axes are
also moved, so they may not appear horizontal or vertical in the display.
the image has been rotated or repositioned in the drawing, the mirror axes are
also moved, so they may not appear horizontal or vertical in the display.
(page 396) to speed up the editing
commands.
To mirror an image along the horizontal or vertical axis
1 Click Image menu ➤ Cleanup ➤ Mirror.
2 Select the image or images that you want to mirror, then press Enter.
3 Do one of the following:
■
To mirror the image along the horizontal axis, select Top To Bottom.
■
To mirror the image along the vertical axis, select Side to Side.
4 Click OK to mirror the image.
5 If you are not satisfied with the results, you can use the AutoCAD UNDO
command to restore the image to its original settings.
Quick Reference
Menu
Image ➤ Cleanup ➤ Mirror
Raster Design Toolbar
Command Line
imirror
Touching Up an Image
Edit bitonal images at the pixel level using resizable brushes and automated
line-drawing functions.
line-drawing functions.
Touching Up an Image | 89