Avaya 3616 Manuel D’Utilisation

  The Avaya Desktop Charger is designed to charge the 

Nickel Metal Hydride (NiMH) Battery Packs. Full charging 
is accomplished in approximately one an a half hours. 
Chargers operate in a 50° to 85° F (10° to 30° C) 
environment. Do not expose them to freezing temperatures 
or direct sunlight. 

  The Desktop Charger is shipped with the appropriate power 

supply for the site’s location. Place the Desktop Charger on 
a flat, horizontal surface. Plug the power supply into the 
Desktop Charger and into an appropriate wall outlet. 

Do not place anything in the Desktop Charger other than the 
Wireless Telephone. You might damage the contacts. Bent 
contacts can keep the Wireless Telephone from charging. 

  The user must end any call in progress by pressing the 

 button on the Wireless Telephone 

before placing the handset into the Desktop Charger. The 
Wireless Telephone may be off or in standby mode during 
charging. 

Place the Avaya 3616 Wireless Telephone into the Desktop 
Charger slot facing forward. If the Wireless Telephone is 
placed correctly, the red indicator light will come on. The 
indicator light will not come on when the slot is empty, 
when the Avaya 3616 Wireless Telephone is improperly 
seated, or when the Desktop Charger has no power applied. 

If the Wireless Telephone is in standby mode, it will display 
its extension number and 

. If the Wireless 

Telephone is turned off, only 

 will display. The 

dots will be racing during the charging cycle. It is normal 
for the Battery Pack to become warm when charging. 

When the Wireless Telephone is fully charged, 

 will display. The indicator light will remain on 

until the Wireless Telephone is removed. 

555-301-709 

Page 17 

Issue 3