Avaya ip office 5410 Manuel D’Utilisation

Function Keys 

1. Press   Admin or 

 Admin 1. See Display Key Programming. .  

2. Pressing Expl? 

to switch to longhand programming mode.  

3. Press Next 

until the required function required is shown, then press Selct 

.  

4.  If the function requires some data to be entered, [ is shown at the bottom of the display. Enter the 

data using the normal telephone keypad.  

5.  The upper part of the display reverts to showing the functions currently assigned to each 

 and 

key.  

6. Use the   and   keys to move between the pages of display keys.  

7.  Select the display key against which to program the new function by pressing that 

 or 

key. 

Caution: Do not select the slot used for the Admin function. Replacing this function will lock the 
phone for further programming until reset through the telephone system. 

8.  If the display slot is not already used, the display shows BUTTON PROGRAMMED!.  

• 

Press 

EXIT to end programming. 

• 

Press 

 Cont to continue programming other functions.  

9.  If the display slot already has a programmed function, the display shows FEATURE ON 

BUTTON. Press the   or   keys until Repla, Keep and Delet are shown along the right-hand 
edge of the display.  

• 

Press Repla 

to replace that existing function with the one just programmed. The 

display then shows BUTTON PROGRAMMED! as above. 

• 

Press Keep 

to keep the existing function and forget the function just programmed.  

• 

Press Delete 

to delete the existing function and forget the function just programmed.