Avaya 4600 Manuel D’Utilisation

Note:

The 4630/4630SW and 4620/4620SW/4621SW/4622SW/4625SW IP Telephones 
have additional, optional administration. See 

on page 114 and 

on page 119 for more information.

STATIC

0

Static programming override flag. If set to “0” static 
programming never overrides file server- (DHCP or 
TFTP) or call server-administered data. If set to “1” the 
file server (TFTPSRVR, HTTPSRVR, TLSSRVR) 
address is overridden with the statically programmed 
value. If set to “2” the call server (MCIPADD) address is 
overridden with the statically programmed value, the 
only non-DHCP settable value. If set to “3” both the file 
server and call server addresses are overridden by the 
statically programmed values. 
STATIC can only be usefully set in DHCP, and values 1 
and 3 must be set via DHCP. STATIC = 1 allows local 
programming of individual telephones to use a different 
file server than the one commonly used by all 
telephones at the site. This is useful to test a different set 
of 46xxsettings.txt parameters or to force a telephone to 
use a different software load than is commonly used. 
STATIC = 2 allows individual telephones to be 
programmed to go to one particular call server. STATIC = 
3 provides the combined features of STATIC = 1 and 
STATIC = 2.

TLSSRVR

" " (Null)

Text string containing the IP addresses of one of more 
Avaya HTTPS servers, in dotted decimal or DNS format.

VLANSEP

1 

VLAN separation. Controls whether frames to/from the 
secondary Ethernet interface receive IEEE 802.1Q 
tagging treatment. The tagging treatment enables 
frames to be forwarded based on their tags in a manner 
separate from telephone frames. If tags are not 
changed, no tag-based forwarding is employed. Values 
are: 1=Change tags as necessary, 2= Do not change 
tags.

VLANTEST

60 

Number of seconds to wait for a DHCPOFFER when 
using a non-zero VLAN ID (1-3 ASCII digits, from “0” 
to “999”).