Avaya 4600 Manuel D’Utilisation

The 4600 Series IP Telephones use Internet Protocol (IP) technology with Ethernet line 
interfaces. The IP telephones supplement the existing Avaya IP Solutions platform. This feature 
provides the user with the capability to natively administer and maintain new 4600 Series IP 
Telephones.

The 4600 Series IP Telephones provide support for DHCP, TFTP, and HTTP over IPv4/UDP, 
which enhance the administration and servicing of the phones. These phones use DHCP to 
obtain dynamic IP addresses and TFTP or HTTP to download new versions of software for the 
phones.

Using either a built-in hub or a switched port, the 4600 Series IP Telephones offer one desktop 
connection for both the telephone set and the PC.

Note:

In all cases, references to “Avaya Communication Manager” or “CM” apply only 
to 4600 Series IP Telephones supporting H.323.

Before plugging in the 4600 Series IP Telephone, verify that all the hardware requirements are 
met. Failure to do so prevents the telephone from working and might have a negative impact on 
your network.

The following hardware is required for 4600 Series IP Telephones supporting H.323 to work 
properly.

Note:

The recommended configuration is the latest PBX software and the latest IP 
telephone firmware. In the event your site does not have the latest PBX software, 
follow the recommendations in the table immediately following.