Manualsbrain.com
  1. Manuels
  2. Marques
  3. Avaya
  4. office 5410
  5. Manuel D’Utilisation

Avaya office 5410 Manuel D’Utilisation

Télécharger
Page de 59
Selecting Personalized Options 
Changing the 5410 Options - Page 21 
IP Office 5410 User’s Guide 
Changing the 5410 Options - Page 21 
40DHB0002UKEY – Issue 1 (7th February 2005) 
Selecting Personalized Options 
Call Log Setup 
Through the Option menu you can specify which types of calls should be included in 
the 5410's call log. See Setting Which Calls are Logged on page 18.  
 
Using Self Test 
Self test can be used to display information about the phone and to check operation of 
the lamps and display. The information may be required by a telephone system 
maintainer.  
1. Press   Option. If 
 Option is not shown, press any 
 Soft Key. 
2. Press   Self Test. A screen of information appears.  
Caution:  
In the top row, the centre of the display should show REL:2.00 or 
higher. If not the telephone’s software needs to be upgraded. Consult 
your system Administrator.  
3.  Press and hold the 
 Test key. The screen lines should all go black and all the 
phone lamps should come on. If they do not consult your system Administrator. 
4. Release 
the   Test key and do one of the following: 
•  To return to the options menu, press 
 Done.  
•  To return to the call handling screen, press 
 Exit.  
 
Default Phone/Erase All Settings 
The Erase option allows you to reset all personalized settings entered through the 
5410's Option menus (except contrast level). It also deletes all entries in the phones 
Call Log and Speed Dial lists. 
1. Press   Option. If 
 Option is not shown, press any 
 Soft Key.   
2. Press 
the   until the display shows: 
•  Speed Dial List, Call Log, User Labels, Options, Language and All. 
3.  If you do not want to erase, do one of the following: 
•  To return to the options menu without erasing, press 
 Cancel.  
•  To return to the call handling screen without erasing, press 
 Exit.  
4.  To continue with erasing, select from Speed Dial List, Call Log, User Labels, 
Options, Language and All and press 
 Erase.  
You will be asked to confirm the action.  
•  If you want to erase all settings, press 
 Erase again.  
•  To return to the options menu without erasing, press 
 Cancel.  
•  To return to the call handling screen without erasing, press 
 Exit.