HP 2000 Manuel D’Utilisation

Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.

Remove the battery (see

), and then remove the following components:

●

Optical drive (see

●

WLAN module (see

●

Keyboard (see

)

●

●

USB board (see

●

Power connector cable (see

)

Remove the display assembly:

Disconnect the display panel cable (1) from the system board.

Release the wireless antenna cables from the clips (2) built into the base enclosure.

CAUTION:

Support the display assembly when removing the following screws. Failure to

support the display assembly can result in damage to the display assembly and other computer
components.

Remove the four Phillips PM2.5×6.0 screws (3) that secure the display assembly to the
computer.

Remove the display assembly (4).

Component replacement procedures