HP 2000 Manuel D’Utilisation
●
●
Keyboard (see
)
●
Top cover (see
●
System board (see
)
●
Fan and heat sink (see
)
Remove the processor:
1.
Use a flat-bladed screw driver to turn the processor locking screw one-half turn
counterclockwise (1), until you hear a click.
counterclockwise (1), until you hear a click.
2.
Lift the processor (2) straight up, and then remove it.
NOTE:
The gold triangle (3) on the processor must be aligned with the triangle icon (4)
embossed on the processor socket when you install the processor.
Reverse this procedure to install the processor.
Component replacement procedures
81