Adaptec duoconnect aua-3020 Manuel D’Utilisation
28
Installing the Device Drivers
Installing on Macintosh Computers
Follow the installation instructions for your Macintosh operating
system.
system.
Macintosh OS X
The drivers for your DuoConnect card are imbedded in Macintosh
OS X. See
OS X. See
to continue.
Macintosh OS 9.x
In this procedure, you install the DisableSleep driver, which
prepares your Macintosh computer to use the DuoConnect card.
prepares your Macintosh computer to use the DuoConnect card.
Note:
Blue and white G3s are not supported.
1
Turn on or restart the computer and insert the DuoConnect CD.
2
Double-click the Start Installation Here file on the CD.
3
Follow the instructions to install the latest Macintosh USB
drivers, if necessary.
drivers, if necessary.
4
Double-click the DuoConnect Installer file and follow the
instructions.
instructions.
5
After the installation is complete, click Restart, if necessary, to
make the new settings take effect.
make the new settings take effect.
6
Verify that the card is seen by your computer by clicking Apple
System Profiler
System Profiler
in the Apple Menu. Then, click the Devices
and Volumes
tab.
Note:
The Apple System Profiler (version 2.5.8 or earlier)
identifies the DuoConnect adapter incorrectly. If you have
one of these earlier versions, download a new version
from Apple's software update page.
one of these earlier versions, download a new version
from Apple's software update page.