HP color laserjet 9500mfp Manuel D’Utilisation
Windows 98 or Windows Me
1
From a command prompt or in an MS-DOS window, type the following:
Mode lpt1:,,p
NOTE
If the product is attached to a parallel port other than LPT1, then substitute the
correct LPT port number in the mode command.
2
Press
Enter
on the keyboard. The response you receive should be similar to these examples:
> LPT1 Not Rerouted
> Resident portion of MODE loaded
> Infinite retry on parallel printer time-out
3
At a command prompt, type
copy /b <FILENAME> <PORTNAME>, where <FILENAME> is the
name of the .RFU file (including the path) and <PORTNAME> is the name of the appropriate
product port (such as LPT1). For example, type the following:
product port (such as LPT1). For example, type the following:
C:\>copy /b c:\9500mfpfw.rfu lpt1
NOTE
If the file name or path includes a space, you must enclose the file name or path
in quotation marks. For example, type
C:\>copy /b "c:\My Documents
\9500mfpfw.rfu" lpt1
4
Press
Enter
on the keyboard. The messages that are described in
appear on the control panel.
NOTE
The product automatically turns off and then on again to activate the update. At
the end of the update process, the READY message appears on the control panel.
5
Print a configuration page and verify that the firmware revision number matches the revision of
the current update.
the current update.
6
Type
exit at the command prompt to close the command window.
60
2 Software description