HP laserjet 3390, 3392 all-in-one Instruction De Maintenance
Control-panel message
Event-log error message
Description
Recommended action
Connect the all-in-one to a
different phone line.
different phone line.
Fax Send error
None
An error occurred while trying to
send a fax.
send a fax.
Try resending the fax.
Try faxing to another fax number.
Check for a dial tone on the
phone line by pressing
phone line by pressing
Start Fax
.
Check that the telephone cord is
securely connected by
unplugging and replugging the
cord.
securely connected by
unplugging and replugging the
cord.
Make sure that you are using the
telephone cord that came with
the all-in-one.
telephone cord that came with
the all-in-one.
Make sure that the phone is
working by disconnecting the all-
in-one, plugging in a telephone to
the phone line, and making a
voice call.
working by disconnecting the all-
in-one, plugging in a telephone to
the phone line, and making a
voice call.
Connect the all-in-one to a
different phone line.
different phone line.
Set the fax resolution to
Standard instead of the default
of Fine.
Standard instead of the default
of Fine.
Fit to Page on flatbed only
None
The copy reduce/enlarge feature
(called Fit to Page) applies only
to copies made from the flatbed
scanner.
(called Fit to Page) applies only
to copies made from the flatbed
scanner.
Use the flatbed or select another
reduction/enlargement setting.
reduction/enlargement setting.
Group dial not allowed in
group
group
None
The speed-dial code that you
typed is programmed for a group.
Adding a group-dial to another
group-dial is not allowed.
typed is programmed for a group.
Adding a group-dial to another
group-dial is not allowed.
Add one-touch buttons
(programmed as an individual
speed dial) or individual speed-
dial codes to a group-dial.
(programmed as an individual
speed dial) or individual speed-
dial codes to a group-dial.
Invalid date
None
An invalid date was specified,
such as June 35.
such as June 35.
Retype the date.
Invalid driver Press
None
You are using the incorrect
printer driver.
printer driver.
Select the printer driver that is
appropriate for your all-in-one.
appropriate for your all-in-one.
Invalid entry
None
Invalid data or response
Correct the entry.
Mem. low 1 copy. Press
[cancel]
[cancel]
None
The all-in-one completed making
one copy. The remaining copies
have been canceled because of
low memory.
one copy. The remaining copies
have been canceled because of
low memory.
Press
Cancel
to clear the error.
Break the job into smaller jobs
that contain fewer pages.
that contain fewer pages.
Memory is low Try again later
None
The all-in-one does not have
enough memory to start a new
job.
enough memory to start a new
job.
Wait until the current job is
finished before starting a new job.
finished before starting a new job.
Memory is low. Press
None
The all-in-one memory has been
almost completely filled.
almost completely filled.
Allow the all-in-one to finish the
job, or press
job, or press
to cancel the job.
Memory low Only 1 copy made None
The all-in-one does not have
enough memory to complete the
collated copy job.
enough memory to complete the
collated copy job.
Break the job into smaller jobs
that contain fewer pages.
that contain fewer pages.
Table 6-1
Alerts and warning messages (continued)
210
Chapter 6 Troubleshooting
ENWW